jimthorn
Jul 10, 03:00 PM
Originally posted by �bergeek
i was using my iBook (800, 32vram, 128mb ram-long story, don't ask...i really want 640mb but i can't put in any RAM)
OK, I just have to ask. What happened? Did you fry the other memory slot or do you just need another memory module? I just added a 512MB to my iBook and I have an extra 128MB one I don't need now...
i was using my iBook (800, 32vram, 128mb ram-long story, don't ask...i really want 640mb but i can't put in any RAM)
OK, I just have to ask. What happened? Did you fry the other memory slot or do you just need another memory module? I just added a 512MB to my iBook and I have an extra 128MB one I don't need now...
c1phr
Apr 17, 11:17 PM
If there's any advantage to paper books, it's that you can take it places anywhere and don't need a computer. I had a job where I took books with me and would read when it was slow.
This is not much of an advantage, esp with iPads and other readers.
All my reading right now is eBooks! Easier to have several books open to cross-reference stuff too.
Yea, for the most part, I'm rarely in a situation like that, but I had considered that. I'm looking at this option: I'm willing to test this first with programming books, which I generally don't read away from a computer anyway. Then I'll decide if I want to move to ebooks exclusively.
For my programming books I use ebooks for being able to search, and access them from my various machines. Its also easier to have them on my screen beside where I am coding.
That was a major reason the ebook option appealed to me, easily portable and searchable.
This is not much of an advantage, esp with iPads and other readers.
All my reading right now is eBooks! Easier to have several books open to cross-reference stuff too.
Yea, for the most part, I'm rarely in a situation like that, but I had considered that. I'm looking at this option: I'm willing to test this first with programming books, which I generally don't read away from a computer anyway. Then I'll decide if I want to move to ebooks exclusively.
For my programming books I use ebooks for being able to search, and access them from my various machines. Its also easier to have them on my screen beside where I am coding.
That was a major reason the ebook option appealed to me, easily portable and searchable.
AppledUp
Apr 23, 05:15 PM
Hey everyone looking to buy a stand for my MBP and I've seen a few but what ones the best for the money?
iGary
Sep 23, 12:24 PM
Yeah, maybe I do need him. :D
more...
Daveman Deluxe
Jul 10, 05:24 PM
I had trouble upgrading the RAM on my iBook the first time I tried too. Those screws are REALLY sensitive to the size of the screwdriver you're using. It HAS to be a #0 Phillips-type screwdriver, or it just plain won't work.
disconap
Dec 5, 10:39 PM
yes i believe so
powermac g4 is in my opinion the best mac made (i have 3)
easy to upgrade
easy to fix
reasonably priced
still runs all the new apps
and ohh yea looks sweet
nedd ne more reasons
Agree 100%.
powermac g4 is in my opinion the best mac made (i have 3)
easy to upgrade
easy to fix
reasonably priced
still runs all the new apps
and ohh yea looks sweet
nedd ne more reasons
Agree 100%.
more...
zimv20
Jan 11, 12:46 AM
yah its it ctrl+pageup or ctrl+fn+pageup..
thanks. i had success w/ ctrl+pageup and ctrl+pagedown.
thanks. i had success w/ ctrl+pageup and ctrl+pagedown.
p0intblank
Dec 6, 03:00 PM
It's not myspace so much folks as it is all the relatively novice computer users dumping all sort of odd code into their page. WMP is a problem simple because we dont have the latest version windows user have, the easiest thing to do is go to the security tab in safari preferences and un check enable plugins, since ive started that ive not had a single myspace crash.
That's a nice tip. Thanks! But does anyone know if MS ever plans on releasing WMP10?
That's a nice tip. Thanks! But does anyone know if MS ever plans on releasing WMP10?
more...
ststephen
May 6, 10:48 PM
Being able to place the original and edited 8x10 next to each other on a 27" screen and have enough unused screen to locate your tools whether photoshop, elements, aperture, lightroom will make you quickly loose interest the MBP 17 or 15. Besides, or what advantage is portability in your main photo crunching Mac? Your mac should be color calibrated, and your printer should match the screen output. The ambiant lighting in your studio and your seating position should be a fixed constant, so you will "see" every before & after the same way. This is especially important when editing on i:eek: glossy screen, which adds its own "coloration" to the image. A matte screen would transform this into a very serious image workstation. Maybe this option will be added to the list?
spoonyfreshh
Feb 20, 06:38 PM
donated.
more...
iMpathetic
Jan 12, 09:43 PM
I think it is a positively scrumptious idea...
http://img.skitch.com/20080113-m4wq2ss2dbqr7b5jgikkms3j5e.jpg
http://img.skitch.com/20080113-m4wq2ss2dbqr7b5jgikkms3j5e.jpg
kbfr08
May 4, 09:36 PM
Updated!
more...
ChrisA
Apr 14, 01:20 PM
Hello all, I have recently received a iMac G5 for very cheap, I tested the machine and i have no display. The first 2 LEDS come on and the third does not. i believe the issue with it is blown capacitors, although im not 100% on this. I have never dealt with a capacitor issue so i'd figure i'd ask if that really is the problem, so it can be fixed. Heres an image of my iMac
http://img687.imageshack.us/img687/3891/photo3mr.jpg
Are the ones on the left needing replaced? Theres about 15 in the machine that look similiar, and few that look like whats on the right.
If this is indeed my problem, where could i get the capacitors that i need?
Do you see those lines across the top of the capacitors. Those are there so if the device fails it will be a more or less controlled explosion where the metal slips on those lines. Failed caps are dead on obvious and make a big mess
If yu really do think one is bad un-solder it and test it. It takes all of 5 minutes and you've got not much to loose
There is absolutely no way to diagnose this without some test equipment. Get at least a multi-meter and likely a meter and an oscilloscope. Then
If you do need to replace them they are 25 cent parts and you don't nee a perfect exact match any electronic parts place will have them.
There is no way to look at this without some test equipment, you cannot see the signal in the traces with your eyes not can you visually see a defective component except in the extreme case of one that has let out some fire and smoke
http://img687.imageshack.us/img687/3891/photo3mr.jpg
Are the ones on the left needing replaced? Theres about 15 in the machine that look similiar, and few that look like whats on the right.
If this is indeed my problem, where could i get the capacitors that i need?
Do you see those lines across the top of the capacitors. Those are there so if the device fails it will be a more or less controlled explosion where the metal slips on those lines. Failed caps are dead on obvious and make a big mess
If yu really do think one is bad un-solder it and test it. It takes all of 5 minutes and you've got not much to loose
There is absolutely no way to diagnose this without some test equipment. Get at least a multi-meter and likely a meter and an oscilloscope. Then
If you do need to replace them they are 25 cent parts and you don't nee a perfect exact match any electronic parts place will have them.
There is no way to look at this without some test equipment, you cannot see the signal in the traces with your eyes not can you visually see a defective component except in the extreme case of one that has let out some fire and smoke
Anonymouslives
Nov 1, 09:32 AM
I'll participate:
I carved the bigger one, my daughter the smaller one...my wife's foot for good measure as well
http://yfrog.com/3udsc0591vj
I carved the bigger one, my daughter the smaller one...my wife's foot for good measure as well
http://yfrog.com/3udsc0591vj
more...
polzii
May 1, 10:09 AM
^^^^^^ That was just a rumor. The Gevey Pro has the same issue, it requires u to go through the procedure again if u reboot or lose service. Rebel was supposed to solve this issue but they have yet to ship their simcard
5300cs
Jul 9, 08:48 PM
Heh, all my friends in Boston used to drive up to NH to get things sales-tax-free .. especially cigs.
When I switched, I listed all the apps I used on windows, then went about looking for the Mac equivalent. IE > Safari, Outlook Express > Mail, Nero > Toast , etc.. it took a while but it was fun in the process. I also found that trying to use windows again now sux 'cause it doesn't have all the programs I'm so used to!
Knock yourself out, sounds like a nice machine.
When I switched, I listed all the apps I used on windows, then went about looking for the Mac equivalent. IE > Safari, Outlook Express > Mail, Nero > Toast , etc.. it took a while but it was fun in the process. I also found that trying to use windows again now sux 'cause it doesn't have all the programs I'm so used to!
Knock yourself out, sounds like a nice machine.
more...
tytanic11
Jun 25, 08:06 AM
I bought this MBP; its currently on its way via UPS. I just want to let everyone know we had a very quick, smooth transaction and I'd definitely do business with this seller again. I'll update this thread when the MBP arrives (UPS says tomorrow)
Dr. Dastardly
Sep 27, 11:25 PM
I'm in the market for a 1 gig stick for my 800mhz iBook G4 but I can't find crucial offering any for the iBook. I'm sure they have some somewhere but I want to make sure they guarantee it.
Send me a link maybe?
Send me a link maybe?
podsorcerer09
Apr 17, 04:01 PM
I've been carefully monitoring the processor loads on my c2d macbook (the black one) to see what kind of processor I would be needing if I buy an air. The decision is really between the 1.86 and 2.13
My loads are:
1.03 .93. 87
These are with chrome and itunes and terminal running along with ical and the likes. nothing too heavy.
Any advice on which processor?
My loads are:
1.03 .93. 87
These are with chrome and itunes and terminal running along with ical and the likes. nothing too heavy.
Any advice on which processor?
jayducharme
Aug 1, 06:54 PM
It's still beats the pants off anything windows...we're just used to everything working so well it's easy to critique.
That's really my point. Apple has set the bar high for itself. If I bought a Windows CE phone, I'd expect to have problems. But few Apple products in the last decade have had so many highly publicized issues as iPhone 4. Notice there isn't much press about iPhone 3GS issues or iPad issues or Mac Mini issues. Apple usually produces produces with great usability and high reliability. Maybe I've just gotten spoiled over the years....
That's really my point. Apple has set the bar high for itself. If I bought a Windows CE phone, I'd expect to have problems. But few Apple products in the last decade have had so many highly publicized issues as iPhone 4. Notice there isn't much press about iPhone 3GS issues or iPad issues or Mac Mini issues. Apple usually produces produces with great usability and high reliability. Maybe I've just gotten spoiled over the years....
ethana
May 2, 02:33 PM
iPhone 2G
Part No: MA712LL/A
Serial No: 7S728YW2WH8
What can you tell me about this iPhone serial number? Where was it made? When? Any additional details?
Thanks gurus.
Ethan
Part No: MA712LL/A
Serial No: 7S728YW2WH8
What can you tell me about this iPhone serial number? Where was it made? When? Any additional details?
Thanks gurus.
Ethan
Lord Appleseed
Apr 22, 09:04 AM
Has anyone noticed if Facetime is less CPU intensive and runs cooler than Skype?
I don't think either Facetime or iChat are that CPU intensive as Skype is.
I don't think either Facetime or iChat are that CPU intensive as Skype is.
Applejuiced
Apr 29, 08:59 AM
I have Simple Mobile service. I had been told to disable the 3G option on my iPhone 3gs. Now I have a new iPhone 4. With Gevey, can I now use the 3G enable? Will my phone work on 3G network? Thank you!
It should work fine with 3G on.
It should work fine with 3G on.
WhatAmI
Apr 29, 06:25 AM
Unless you'd go bankrupt from loosing out on a potential 75$ uplift on resale value I'd drop 03.10.01. If you still had 01.59 I would have of course reponded differently...